YARDBEAST 3514 429cc 14HP Kohler CH440 Engine 3.5" Wood Chipper Shredder New

The Yardbeast 3.5” is a heavy-duty chipper, designed for customers with big properties and more demanding applications. Is powered by 429CC Kohler CH440 Engine, capable of delivering the torque needed.

It counts with a centrifugal clutch that provides protection to the engine. It’s offered in two versions: ATV towable or Hand Towable.  The gooseneck discharger gives you the convenience that you need.

• All steel thick chopping frame and carriage: Thanks to its carefully angled anvil and blade cutting angles that when combined, create an phenomenal self-feeding action that will have you running for more branches to chip.
• Pivotal frame opens up for easy and quick access to cutting blade and rotor: Open up the frame, and you have instant access to the cutting blade and rotor. From there you can appreciate the rotors heavy build, one blade setup and the enormous flywheel.
• This pivotal frame design is only found in commercial grade chippers.
• Transmission clutch for easy starts and better engine shock load protection.

• Featuring a powerful, professional-grade 429cc 14HP Kohler CH440 engine: In one word, a workhorse. This engine is capable of delivering the torque needed on the most demanding applications and conditions.
• Equipped with Quad-clean cyclonic air cleaner; and Forged-steel crankshafts and tough Stellite®-faced exhaust valves with Tufftride-coated stems and cast-iron cylinder bores. Torque output rated at 22.7ft-lbs.
• Chips up to 3.5″ true feed capacity: Our design team paid great attention to the fact that branches are not straight.
• Our feed chute is wide enough to accommodate riddled branches with twigs and leaves.

• Chipping capacity: 3.5"
  
• Rotor RPM: 3,000
  
• Rotor Weight: 56 lbs.
  
• Blade: D2 Tool Steel Blade
  
• Blade dimensions: 5.82" x 2.33"
  
• Rotor Construction: 7/16" wafer front disc with 1/4" rotor vanes
  
• Flywheel: 17.32"
  
• Feed Hopper: 24" x 11"
  
• Frame construction: 7-ga steel. Weld seams all around
  
• Bearing units: SKF® roller sealed bearings /custom steel housing
  
• Discharge height: 54.7"
  
• Control: Discharge deflector
  
• Chipper Weight (w/engine): 320 lbs
• Make: Kohler CH440 Command Pro® 14HP engine
  
• RPM: 3,600
  
• Torque: 19.8ft-lb @ 2,400RPM
• Dry Weight: 72.8 Lbs
  
• Displacement: 429 cc
  
• Oil Capacity: 1.4 quarts (1.3 Lts)
  
• Fuel Capacity: 7.0 Lts
  
• Emissions: CARB Tier III certified